Strongu U6

Hot - selling mining machine StrongU Miner STU-U6 is a Pundi11 algorithm, mainly used for mining DASH, of course, it can also be used for mining other NPXS11. After mass production and shipment, the official rated calculation force is 420G±10%, and the power consumption on the wall of the machine is 2100W±10%  ,So far the market has the highest computing power models, all-in-one models.

  Contact Now
Product Details

StrongU Miner STU-U6 is a Pundi11 algorithm, mainly used for mining DASH, of course, it can also be used for mining other NPXS11. After mass production and shipment, the official rated calculation force is 420G±10%, and the power consumption on the wall of the machine is 2100W±10%  ,So far the market has the highest computing power models, all-in-one models.

Algorithm: X11

Mineable currency :DASH

Rated power :420G±8%

Product size :370*135*208mm

Mining machine power consumption :2100W±10%

Net weight: 8.5 kg

Cooling mode :2 x 12038 fans

Operating temperature :0℃-40℃

Network connection :Ethernet

Noise: 76 db

Warranty :6 months

Input voltage :AC 220-240V,50/60Hz

Rated power: 2600W

Power efficiency: 93%

DASH mining machine STU-U6, according to the published parameters at that time, the calculation power of 660G, power consumption as low as 1300W, with less than 2W/G power consumption with a dazzling halo, but when the delivery in September and October, it disappointed many miners, the calculation power of the whole machine did not increase much, the power ratio did not drop, when the delivery of 420G calculation power. Power consumption 2100W, power consumption ratio of the whole machine is only 5W/G, power consumption ratio is only comparable to the current mainstream models in the market.

Strongu U6

Although a little disappointed, Strau U6 is still the DASH mining machine with the highest computing power in the market at present. Besides, the whole machine is small and has some improvements different from traditional mining machines. Let's have a look at it and discuss it again.

StrongU Miner STU-U6 (StrongU Miner STU-U6) is a Pundi11 algorithm, mainly used for mining DASH, of course, it can also be used for mining other NPXS11 by varieties, after mass production and shipment officially announced the rated power 420G±10%, the wall power consumption of the machine is 2100W±10%, and provides a 6-month warranty period.

Strongu U6

The whole box is very small, of course, it can not be reflected in the picture, the size, gross weight and net weight are directly marked on the outer box.

Strongu U6

Open the package you can see that Sz U6 integrated power supply, the use of parallel double fans, single side air cooling, the net weight of the machine is 8.5 kg.

Strongu U6Strongu U6

It can be seen from the side that Sichuangyou U6 is small and the whole machine is very short. When carrying the mining machine, it will feel very light. The short fuselage also helps to bring the heat out quickly.

Strongu U6Strongu U6

Sichuangyou U6 can stand and lie, of course, according to the traditional mine frame or can only lie, the size of standing up or exceed the standard.

Strongu U6Strongu U6

The integrated power supply model is STU-HQ2680, providing a maximum output of 2500W and a power conversion rate of 93%.

Strongu U6Strongu U6

Power supply with a control switch, the use of 16A power cord, according to the experience of xiaobian this section of power supply should be hanqiang power supply, it seems that the power supply of U6 is very important.

Strongu U6Strongu U6

Send your message to us