Core T3 + 57t is a powerful new generation mining machine based on industry-leading T3 + ASIC technology, with higher efficiency, durability, cooling capacity and better long-term stability.Its design is very good, reaching 57 / s in 3300W high hash mode.In the efficiency mode, the efficiency can be as low as 46W / T.

Hash rate: 57 Th / S (+ / - 5%)

Power consumption: 3300W (+ / - 10%, wall, 93% efficiency PSU, 25 ° C temperature)

Size: 335mm (L) * 205mm (W) * 293mm (H)

Net weight: 12.3kg

Allowable ambient temperature range: 0-40 '

Network connection: Ethernet

T3 + has four adjustable operation modes, and the official parameters are as follows:

E mode-Overall power consumption: 2100W, overall computing power: 40t / set

B mode-Overall power consumption: 2600w, overall computing power: 45t / set

F mo-Power consumption of the whole machine: 3000W, computing power of the whole machine: 50t / set

P mode-Overall power consumption: 3600W, overall computing power: 57t / set

How to use innosilicon T3 + ipset (IP address reporting) setting button:

1. Press the ipset button for 1-4 seconds

(1) Send the IP of the machine to the "setip" tool;

(2) Cooperate with the "setip" tool to set the miner to a static IP within the specified range of the tool

2. Long press the ipset key for 4-15 seconds, the static IP will change to dynamic IP, and the ore pool setting will return to the default setting

3. Long press the ipset key for more than 15 seconds to switch the machine IP to static IP and restore the IP to the default IP: 192.168.1.254

Usage and function of innosicon T3 + reset button: short press the reset key to restart the machine, and long press for 5-10 seconds to restore to the factory setting.

Innosilicon T3 + status indicator Description:

The status of normal indicator is continuously on, indicating static IP, and flashing indicates automatic acquisition of IP address (DHCP)

Fault indicator: when the lamp is off, it indicates that the miner is in normal state; When the light is on, it indicates that the network or miner has failed.

Innosilicon T3 + uses four 12V 2.7A fans to provide heat dissipation for the mining machine.

Innosilicon T3 + bitcoin miner installation settings

Before the miner is put on the shelf, please contact the after-sales personnel in time if:

● open the bag, check the miner and check whether the warranty sticker is damaged.

● if there is metal collision sound when shaking the miner.

● check whether the appearance of the four fans on both sides is intact.

After confirming that there is no abnormality, plug in the power line, connect the network cable, turn on the power switch, and the mining machine starts to work.

Innosilicon T3 + there is an indicator light on each force calculation board to display the working state of the force calculation board. Continuous illumination indicates normal operation. Flashing indicates that the temperature of the force calculation board is too high. It is necessary to check whether the fan of the miner is normal. If the indicator light is not on, it means that the force calculation board is not running. You can try to restart the miner.